|
WHISPER WIND GENERATORS |
|
The Whisper 100 and 200 are shipped in a 24
volt configuration, but can easily be changed to 12, 36, or 48
volts by the installer. The included controller is adjustable
for use with 12, 24, 36 and 48 volt battery systems and the
voltage can be adjusted for any battery type. The control can be
set to to stop the blade from spinning when the battery is fully
charged, avoiding wear when power is not needed. The control has
a "Selectable Silent Mode" setting that allows the user to
select any specific period to automatically turn the wind
turbine on or off.
An optional digital display may be added to
the control to display total kilowatt hours, peak amps, peak and
average wind speed to measure wind speed, optional wind speed
sensor must be ordered. |
|
|
|
|
Whisper 100 Wind Generator
The Whisper 100 is designed to
operate in a site with wind speed averages of 12 mph and
greater.
It delivers 900 watts peak power
at 28 mph (12.5 m/s). It can provide 100+ kWh per month, 3.4 kWh per
day, in a 12 mph average wind speed location.
The 100, with its 7 ft. (2.1m)
rotor diameter and 40 sq. ft. swept area, is rugged enough for
extreme environments. The 3-blade design lasts longer and is more
stable in turbulent wind.
The Marine version is sealed and
powder-coated for use in coastal and nautical environments.
Whisper 200 Wind Generator
The Whisper 200 is designed
for the user who lives in low to moderate wind speed averages
(less than 12 mph). The bigger brother to the 100, the 200 features
a 10 ft (3.1m) 3-blade rotor diameter and an 80 sq. ft. swept area
that provides the user with greater output at low wind speed
averages. The 200 has twice the swept blade area, providing double
the potential energy, compared to the 100. It delivers 1000 watts
peak power at 28 mph (12.5 m/s), but has a higher output than the
100 at lower wind speeds.
Whisper 500 Wind Generator
The Whisper 500 is a 3000-watt
rated turbine that will deliver in excess of 500 KWH per month
in a 12 mph wind. This machine has a 14-foot, 2 blade rotor
providing 500 sq. ft. of swept area. It features a handmade
fiberglass and foam core blade for smooth, high efficiency operation
and low wind start-up. It also incorporates the patented "angle
governor" design for quiet operation in high winds. The 500 is an
excellent machine for village power projects, farms, ranches,
back-up power and remote homes with large energy demands. The
Whisper 500 comes in two boxes and is shipped truck freight.
The Whisper 500 is available in a 24 volt and a 48 volt version.
|
Description |
Weight |
PART NUMBER
|
OUR PRICE |
Purchase |
|
Whisper 100 w/Charge Control |
73 lb. |
016-01154 |
$2,542 |
 |
|
Whisper 100 w/o Charge Control |
70 lb. |
016-01155 |
$2,240 |
|
|
Whisper 100 Marine w/Charge
Control |
80 lb. |
016-01162 |
$2,811 |
|
|
Whisper 200 w/Charge Control |
85 lb. |
016-01180 |
$3,370 |
|
|
Whisper 200 w/oCharge Control |
80 lb. |
016-01181 |
$3,191 |
|
|
Whisper 200 Marine w/Charge
Control |
90 lb. |
016-01189 |
$3,568 |
|
|
Whisper 200 -
120 volt Grid-Tie |
80 lb. |
016-01199 |
$3,193 |
|
|
Whisper 200 - 230 volt Grid-Tie |
80 lb. |
016-01198 |
$3,193 |
|
|
Charge Control Display for 100/200 |
1 lb. |
016-01211 |
$125 |
|
|
Whisper 500 w/ Charge Control 24V |
310 lb. |
016-01144 |
$8,708 |
|
|
Whisper 500 w/ Charge Control 48V |
310 lb. |
016-01145 |
$8,708 |
|
|
|
TOP
|
|
Parts
and Accessories for Whisper Wind Turbines
Whisper 100/200 Tower Kits
Whisper 100/200 tower kits
come in 24 (7.2m), 30 (9m), 50 (15m), 65 (19.5m), and 80 (24m)
heights. Each tower kit comes with all hardware necessary to install
a tower, except guy supports, pipe and cement. All parts bolt or
clamp together and no welding is required. These tower kits use
2-1/2" (63.5mm) CQ40 fence pipe or schedule 40 water pipe. Actual
O.D. is 2.875" (73mm)
Whisper 500 Tower Kits
Whisper 500 Tower Kits are
available in 30 (9.1m), 42 (12.8m) and 70 (21.3m) heights.Earth
Auger Sets
Screw-in "auger" type guy
anchors
can be used in loamy and gravelly soils. Other soil types may
require concrete footings or expansion bolts. Use 36" and 48" augers
with Whisper 100/200 installations and 48" and 60" augers on Whisper
500 installations. Consult an engineer or geologist if you have
questions about guy supports.
|
|
WHISPER TOWERS, PARTS, &
ACCESSORIES |
|
Description |
PART NUMBER |
OUR PRICE |
Purchase |
|
Whisper 100 & 200 24 Guyed Tower Kit |
016-01083 |
$499 |
|
|
Whisper 100 & 200 30 Guyed Tower Kit |
016-01089 |
$850 |
|
|
Whisper 100 & 200 50 Guyed Tower Kit |
016-01095 |
$1,212 |
|
|
Whisper 100 & 200 65 Guyed Tower Kit |
016-01098 |
$1,410 |
|
|
Whisper 100 & 200 80 Guyed Tower Kit |
016-01101 |
$1,975 |
|
|
Whisper 500 30 Guyed Tower Kit |
016-01110 |
$1,345 |
|
|
Whisper 500 42 Guyed Tower Kit |
016-01104 |
$1,540 |
|
|
Whisper 500 70 Guyed Tower Kit |
016-01107 |
$1,971 |
|
|
36 inch Galvanized Auger Set of 4 - 24 27
Towers |
016-01116 |
$212 |
|
|
48 inch Galvanized Auger Set of 4 32- 50
Towers |
016-01122 |
$246 |
|
|
60 inch Galvanized Auger Set of 4 65- 80
Towers |
016-01125 |
$388 |
|
|
Whisper Charge Control |
016-01211 |
$107 |
|
|
Blade Set, Whisper 100 |
016-010BLA1W |
$198 |
|
|
Blade Set, Whisper 200 |
016-010BLA2W |
$236 |
|
|
Blade Set, Whisper 500 |
016-010BLA5W |
$1,487 |
|
|
Nose Cone, Whisper 100 |
016-010NOS1W |
$30 |
|
|
Nose Cone, Whisper 200 |
016-010NOS2W |
$39 |
|
|
Nose Cone, Whisper 500 |
016-010NOS5W |
$59 |
|
|
|
|
|
|
|
|
|
|
