|
Solar-Catalog.com 2008 |
||
|
Xantrex SW Plus The New SW Plus Inverter/Charger, like the SW, is designed to provide homes with a completely independent power supply. They can be programmed to operate as a stand-alone inverter, a generator hybrid, for utility management, or for back-up power. Surge power has been improved. The SW Plus cannot be used as a utility-tied sell-back inverter. All program settings are stored in flash memory so they are maintained even if the inverter is disconnected from the battery. Two SW Plus inverters can be stacked to provide up to 11 kW of 120/240 VAC power. The inverter communications adapter interfaces with a personal computer. The SW Plus can be programmed to start and stop generators with the addition of a GSM. The ALM can be added to control loads for power diversion regulations or to control a battery vent fan. ETL listed. 2-year warranty. Dimensions are 15" x 22.5" x 9" The SW Plus Long DC Conduit Box (DCCB-L) connects to the DC side of one or two inverters and provides a centralized location for the DC circuit breakers and PV Ground Fault Protection (GFP) breakers. It is also designed to incorporate up to two charge controllers, and cabling for a battery meter (there is a space on the front cover to mount a Xantrex TM500A meter). The DCCB-L includes a 175 or 250 amp circuit breaker, a DC negative bus bar and 500A/50 mV shunt, battery cables (1 set) and a ground wire connected to the ground bar. For expandability, the Long DC Conduit Box is designed so that a second DCCBL can be added on for additional breaker spaces, wiring, room and controller mounting spaces. Knockouts are provided for 1/2", 3/4" and 2" sizes. Certified to meet UL1741-2001. The SW Plus Long AC Conduit Box (ACCB-L) connects to the AC side of one or two SW Plus inverters. It is designed to protect the wiring connections to the inverter and provides room for up to nine additional AC disconnect breakers (Square D, Type QOU, DIN rail mounted) to protect user-specified loads. The ACCB-L includes an AC bypass switch (for a single AC input source) and input/output wiring attached to the AC Input/Output Terminals, a Neutral bar with neutral wire installed, and an isolated HOT bar.1 or 2 inverters and AC and DC Conduit Boxes can be bolted to the 2-piece back plate to build a power panel. Other options at right can be added to the system. |
||
|
All transactions made on this site are secure and Hacker Safe.
|
||
|
||
|
This Site
Created by Artes del Lobo, Taos New Mexico & Maintained by Terry R. Wolff |