UniRac SunFrame
 Thank you for visiting our 2012 solar catalog
 

Please take note, that on all PV Mounting systems there may be additional shipping fees to what you will be charged on-line.
If this is the case, we will notify you with the amount of the additional fee and where you can make your payment.

PV Mounting System for Pitched Roofs

SunFrame is the only PV module mounting system designed to enhance the appearance of the home. Add aesthetics to the benefits of PV power. When an installation has to look great, SunFrame offers finish choices and low, clean lines that become as natural a part of a home as a skylight. It delivers the installation ease you’ve come to expect from UniRac while meeting both the Uniform and California building PART NUMBER s.

Components

1. Inter-module rails provide support shelves for the modules. Depending on the modules’ thickness, its upper surface can be as little as 2.125 inches above the roof. Rails come in bulk packs of eight 192" pieces in clear anodized or dark bronze finish.

2. 192" module-specific cap strips secure modules and finish the array topside, forming a gap-free frame. Self-drilling screws at 16" intervals provide holding power. Order cap strips for the module brand and model to be installed. Cap strips are available in clear or dark bronze anodized finishes.

3. End caps finish rail ends to complete the frame.

4. L-feet attach directly through asphalt shingle roofs and support the rails one-half to three-quarters of an inch above the roof surface to provide convective air flow for ventilation.

5. Splices safely extend rails.

6. Standoffs (optional), designed for standard flashing, support L-feet above tile or shake roofs.
NOT SURE WHAT YOU NEED?
Generating a Parts List is easy

For a list of parts you will need, go directly on-line and use the SolarMount Calculator at http://www.unirac.com/estimator/part/estimator/detail/solar

On the left side of the first page you will need to insert this information:
           Solar Taos
           Terry Wolff
           info@solartaos.com

On the right side of the page you need to insert your
           Name
           Project name
           Address

When you complete all the information requested and have your results, press the email button so we will be able give you your quote (the calculator will provide you with a list of parts you need but the OUR PRICEs listed will be the manufactures suggested retail OUR PRICE), also we recommend that you print out a copy for your own records as well.

This is the information which you will need to have in order to get your Parts List

1

Project Name
2

Project Address
3

Your Phone Number
4

Module Orientation (Portrait or Landscape)
5

Module Manufacturer
6

Module Model
7

Mounting Type (SunFrame or SolarMount)
8

Number of Module Rolls
9

Number of Module Columns
10

Number of Arrays
11

Number of Modules
12

Total Length and Square Footage of roof area available
13 Roof Pitch (Approx Degrees)

 The following information can be obtained from your local building inspector
14 Snow Load (psf)
15 Wind Exposure
16 Basic Wind Speed
17 Importance Factor (Use 1 for homes and business up to 300 people and use 1.5 for schools, hospitals, etc where 300 plus people congregate)
18 Building Height
19 Roof Zone (• If the least horizontal building dimension is less than 40’ (most residences) the roof zone setback length is 3’. For larger buildings or slopes >45 degrees, see Step 3, page 4 in the Sun Frame Installation Manual
• Zone 1: Interior roof zone, no modules are located within 3’* of an edge or apex
• Zone 2: Edge roof zone, at least one module is located within 3’* of one edge or apex
• Zone 3: Corner roof zone, at least one module will be within 3’* of a corner
* or other roof setback zone as determined above)
20 Roof Overhang (Yes if the modules will be extended past an exterior wall)

The above information is what you will need for your parts list and estimate.

WE ACCEPT...

Sign up for PayPal and start accepting credit card payments instantly.

All transactions made on this site are secure and Hacker Safe. All Our Payments are processed through PayPal, a trusted company owned and operated by eBay.com
Prices are usually correct but subject to change, if there has been any change we will notify you .  

This page designed and maintained by Terry R. Wolff
 Last up-dated on January 04, 2012

HOME | Online Solar Catalog | Solar Panel Store | Solar Power Systems | Wind Energy | Hydro Power Systems | OutBack Energy Products | Electrical Supplies | About Us | Contact Us | Ordering Information | Link Resource