Grid-Tie Inverters at Solar-Catalog.com

M190-24-240-S12 (1 CSI/STP)

190 W

240 V

030-03732

$199

M210-24-240-S12 (1 Sanyo)

210 W

240 V

030-03733

$230

Enphase Installation Kits

K240-01-001

Install kit for one AC branch circuit - 240 VAC

030-03747

$80

K208-01-001

Install kit for one AC branch circuit - 208 VAC

030-03748

$80

Enphase Monitoring Solutions

IEMU-01

Internet monitoring gateway with first year of monitoring

030-03751

$360

Residential Service Plan

5 -year monitoring service for residential systems < 10 kW

030-03765

$625

Commercial Service Plan

5-year monitoring for commercial installations

030-03765C

Call

FRONIUS INVERTERS

IG 5100

5100 W

240VAC

030-03407

$3,322

IG 4500-LV

4500 W

208VAC

030-03412

$3,166

IG 4000

4000 W

240VAC

030-03405

$3,051

IG 3000

2700 W

240VAC

030-03403

$2,093

IG 2500-LV

2350 W

208VAC

030-03410

$1,976

IG 2000

2000 W

240VAC

030-03402

$1,885

IG Plus 3.0

3000 W

208 V
240 V
277 V

030-03481

$2,580

IG Plus 3.8

3800 W

030-03483

$3,052

IG Plus 5.0

5000 W

030-03485

$4,262

IG Plus 6.0

6000 W

030-03487

$4,309

IG Plus 7.5

7500 W

030-03489

$4,985

IG Plus 10.0

10,000 W

030-03491

$6,645

IG Plus 11.4-1

11,400 W

030-03493

$7,545

IG Plus 11.4-3

11,400 W

208/240 V

030-03495

$7,545

IG Plus 12.0

12,000 W

277 V

030-03497

$7,745

Fronius

Extended Warranty - 15 years total

030-03471

$899

Fronius Accessories

KACO INVERTERS

Kaco

Blueplanet 1501xi

1500 W

240 V

030-03515

$2,085

PV POWERED INVERTERS

PVP1100 SVR

1100 W

120 V

030-03805

$2,425

PVP1100 EVR

1100 W

120 V

030-03804

$2,425

PVP2000 SVR

2000 W

240 V

030-03408

$2,535

PVP2000 EVR

2000 W

240 V

030-03806

$2,535

PVP2500

2500 W

240 V

030-03809

$2,775

PVP3000SVR

3000 W

240 V

030-03810

$2,995

PVP3500

3500 W

240 V

030-03811

$3,195

PVP4600

4600 W

208 V

030-03813

$3,925

PVP4800

4800 W

240 V

030-03815

$3,940

PVP5200

5200 W

240 V

030-03817

$4,180

PVM1010

Monitor card - 1 required for each inverter to be monitored

030-03803

$370

SMA AMERICA INVERTERS

SB8000US

8000 W

208/240 V

030-0308X

$4,251

SB7000US

7000 W

208/240 V

030-03087

$3,783

SB6000US

6000 W

208/240/277 V

030-03086

$3,371

SB5000US

5000 W

208/240/277 V

030-03085

$3,250

SB4000US

3500 W
4000 W

208/240 V

030-03084

$2,600

SB3000US

3000 W

208/240 V

030-03083

$2,095

SB1800U

1800 W

120 V

030-03105

$1,640

SB700U

700 W
600 W
460 W

120 V

030-03113

$1,225

ST6000U

3600 W

208/277 V 3PHASE

030-03060

$29,530

ST6000U+WebBox

3600 W

208/277 V 3PHASE

030-03061

$31,530

ST7000U

4200 W

208/277 V 3PHASE

030-03070

$31,945

ST7000+WebBox

4200 W

208/277 V 3PHASE

030-03071

$33,945

SMA WebBox

030-03141

$870

SMA Accessories

SOLECTRIA PVI INVERTERS

PVI 1800W-208

1800 W

208 V

030-03852-208

$2,465

PVI 1800W-240

240 V

030-03852-240

$2,465

PVI 2500W-208

2500 W

208 V

030-03849-208

$2,840

PVI 2500W-240

240 V

030-03849-240

$2,840

PVI 3000W-208

2900 W

208 V

030-03848-208

$2,880

PVI 3000W-240

240 V

030-03848-240

$2,880

PVI 4000W-208

3900 W

208 V

030-03847-208

$3,420

PVI 4000W-240

240 V

030-03847-240

$3,420

PVI 5000W-208

4900 W

208 V

030-03846-208

$4,095

PVI 5000W-240

240 V

030-03846-240

$4,095

PVI 5300W-208

5300 W

208 V

030-03845-208

$4,370

INVERTER PRICES & PURCHASE

PVI 5300W-240

240 V

030-03845-240

$4,370

XANTREX GT INVERTERS

Xantrex

GT2.8

2800 W

240/208 V

030-01830

$2,005

Xantrex

GT3.3

3300 W

240/208 V

030-01831

$2,428

Xantrex

GT3.8

3800 W

240/208 V

030-01832

$2,644

Xantrex

GT4.0

4000 W

240/208 V

030-01834

$2,775

Xantrex

GT5.0

5000 W

240/208 V

030-01835

$3,337

Xantrex

GT3 Fan Kit

030-01836

$150

TOP

Xantrex GT Grid Tie Inverters
GT2.8, GT3.3, GT3.8, GT4.0 and GT5.0

The Xantrex GT-series inverters have an integrated, lockable 600 volt PV/Utility disconnect switch which may eliminate the need for external disconnects in some locations. Its attached wiring box provides protection for all AC and DC connections, eliminating exposed wiring during inverter installation and removal. The wiring box includes eight 3/4 inch knockouts and easy access DC and AC terminal blocks that accept wire sizes from #14 to #6 AWG.

The GT is packaged in a NEMA 3R enclosure for outdoor installation. It incorporates a slotted, hook-style back plate. For large systems, multiple inverters can be mounted side by side centered on standard 16" stud spacing to reduce visible conduit and make installations look more attractive.

GT inverters come standard with a backlit 16-character two line Liquid Crystal Display. The display provides inverter power, daily and lifetime energy production, PV array voltage and current, utility voltage and frequency, time online "selling" today, fault messages, and two installer customizable screens. Tapping a finger close to the LCD activates the backlight display. With each tap, the display cycles through all the communication screens.

The LCD is always on standby, ready to provide information even at night. When inverters are daisy chained using standard CAT5 Ethernet cable, each inverter display will report the output of the entire system. The GT offers an isolated RS232 port and two Xanbus RJ45 communication ports. No additional communication ports or cards are needed to connect a PC.

Xantrex offers the GT Solar Inverter Viewer software, which can be downloaded from their Web site. The GT 3.0 provides 3000 watts of power up to 30°C (86°F) and 2,500 watts of power up to 45°C (113°F). For added protection from heat in desert extremes or south facing inverter installations, an optional fan kit can be ordered.

UL listed.

5- year warranty standard, a 5 year extension is available

TOP

SMA America
Sunny Boy Grid Tie Inverters

Inverters for residential, commercial, and industrial applications

The SMA Sunny Boy inverters are the most widely used grid-tied PV inverter in Europe and the US. SMA inverters available in sizes from 700 watt to 6000 watts allow them to fit a wide range of applications from small residental systems to very large 3-phase industrial systems.

All SMA inverters come with LCD digital monitors that display instantanious power output, energy delivered during the current day and since the installation.

The SB700 and 1800 have 120 VAC output. The SB3000 and SB4000 are auto-sensing for use on 240 VAC and 208 VAC applications. The SB 5000, 6000 and 7000 can be used in 208, 240 and 277 VAC applications. SMA offers a wide range of accessories for communications and monitoring of the system. The SB 3000 and 4000 come with a DC disconnect switch and the SB 5000, 6000, and 7000 come with an AC/DC disconnect switch, each with an integrated fused series string combiner that connects to the bottom of the inverter.

The disconnect switches are housed in a NEMA 3R enclosure. All electronic components are in a sealed compartment. The SB 700 and SB 1800 are housed in a completely sealed stainless steel enclosure. Outdoor installation is recommended for the sealed inverters so natural air-flow can cool the heatsink.

The display cannot be used if optional remote communication modules are used in the 1800U and 2500U inverters. The 2500U is available for use on 240 VAC and 208 VAC power. The 6000U can be used on 208, 240 and 277 VAC power. SMA offers a wide range of accessories for communications and monitoring of the system.

The 3800U and 6000U is in a NEMA 3R enclosure but all electronics are in in a sealed compartment. All of the smaller inverters are housed in a completely sealed stainless steel enclosure. Outdoor installation is recommended for the sealed inverters so natural air flow can cool the heatsink. If these inverters are installed inside, the SunnyBreeze on the next page is recommended.

This chart (click here) shows a typical module string size for many PV module brands that can be used with each inverter. This number can vary depending on maximum and minimum temperatures in the location where the system is installed. For more details, consult your dealer or go to http://www.sma-america.com on the web to use SMA’s string-sizing software. All inverters are compliant with UL 1741, UL 1998, IEEE-929, EEE-1547, FCC Part 15 A & B. The new SMA inverters now have a standard 10-year warranty.

INVERTER PRICES & PURCHASE

Model	Max AC Power	AC Output Volts	DC Array Voltage	Peak Power Tracking	CEC Efficiency	Maximum DC Current	Display	Dimensions	Weight
SB7000US	7000	208VAC 240VAC	250-600	250-480	95.5% 96.0%	30A	NO	18.4 x 24.1 x 9.5	143
SB6000US	6000	208VAC 240VAC 277VAC	250-600	250-480	95.5% 95.5% 96.0%	25A	NO	18.4 x 24.1 x 9.5	143
SB5000US	5000	208VAC 240VAC 277VAC	250-600	250-480	95.5% 95.5% 95.5%	21A	NO	18.4 x 24.1 x 9.5	143
SB4000US	3500 4000	208VAC 240VAC	250-600	220-480 250-480	95.5% 96.0%	18A	NO	17.8 x 13.8 x 9.3	88.6
SB3000US	3000	208VAC 240VAC	200-500	180-400 200-400	95.5%	17A	YES	17.8 x 13.8 x 9.3	88.6
SB1800U	1800	120VAC	156-400	156-350	91.5%	12A	YES	17.1 x 11.6 x 8.4	60
SB700U	700 600 460	120VAC	150-250 125-250 95-250	123-250 100-200 77-150	91.5%	7A	YES	12.7 x 12.6 x 7.1	43

TOP

Sunny Tower 36kW and 42 kW Systems

The Sunny Tower combines the advantages of central inverters with the performance and installation advantages of string inverters by offering assembled 36-kW or 42-kW systems.

Each Sunny Tower consists of six 7-kW or 6-kW inverters mounted on a stainless steel structure. Two Sunny Towers can be combined as an 84 kW system.

The Sunny Web Box may be purchased separately or assembled with the Sunny Tower making the system internet-ready.

This type of system offers the advantage of multiple array MPP tracking, optimum operation under partial load, 96% CEC efficiency and quick delivery. Sunny Towers can be assembled on-site, eliminating the need for specialized heavy equipment.

The system is NEMA 3R outdoor rated and can be used only in three phase systems at 208 VAC or 277 VAC and its total weight is 1115 lbs. (Tower is 330 lbs, plus six inverters.)

Sunny Beam Wireless System Monitor

Model	Max AC power	Max AC output	DC Array voltage	Peak power tracking	Max DC current
ST6000U	36 kW	3 x 58A	250-600	250-480	6 x 25A
ST6000U+WebBox	36 kW	3 x 58A	250-600	250-480	6 x 25A
ST7000U	42 kW	3 x 68A	250-600	250-480	6 x 30A
ST7000+WebBox	42 kW	3 x 68A	250-600	250-480	6 x 30A

TOP

SMA Accessories

With the new Sunny Beam wireless system monitor from SMA you can remotely monitor the performance of your PV system without wires. It also stores a month’s worth of production data for review at any time. The Sunny Beam can monitor up to four inverters and provide simultaneous display of output power, daily energy, and energy total. The Sunny Beam automatically logs each day’s energy production and displays it in graph format for the past thirty days.

Based on the Energy Production of the PV plant, the Sunny Beam will also calculate the amount of CO2 and money that has been saved by the plant. The built-in solar cell keeps the internal batteries fully charged. The internal batteries may also be recharged via the built-in USB port. The Sunny Beam is compatible with both old and new Sunny Boys and is an excellent upgrade to an existing system. Data from the Sunny Beam can also be displayed and saved to a PC with Sunny Data Control software. The Sunny Beam menus are easily navigated with a simple selector knob. The Sunny Beam comes with an antenna modules for one inverter. Monitor up to 3 additional inverters by purchasing additional antenna modules.

5 year warranty.

Description	PART NUMBER	OUR PRICE	Purchase
Sunny Beam Wireless System Monitor	030-03143	$550
Additional Antenna Module for Sunny Beam	030-03144	$195

TOP

SMA Web Box - Sunny Portal Connection

The SMA Web Box provides a connection between the operator’s computer and/or the Sunny Portal web site (www.sunnyportal.com). Web Box can be connected to a Sunny Boy, Sunny Island or Sunny Central inverter or many inverters. Connection is made with 4-conductor twisted pair cable between the inverter’s RS-485 output and the Web Box terminals. The Web Box is also connected to a local area network (LAN) with and ethernet cable or to a phone line.

The Web Box will store data in its internal 8 MB memory or on a standard SD memory card and can be set to upload the data to the Sunny Portal web site.

5 year warranty

Model	PART NUMBER	OUR PRICE	Purchase
SMA WebBox	030-03141	$899

TOP

Sunny Boy Control and Monitoring

Model	SMA Sunny Boy Accessory Description	PART NUMBER	OUR PRICE	Purchase
RS-232-N	Module for remote communication between Sunny Boy without display and a Windows based PC. Requires cable and Sunny Data software. Maximum distance from PC to inverter is 50 feet. Software is available on the web from www.sma-america.com.	030-03122	$175
RS-485-N	Module for remote communication between multiple Sunny Boy Inverter(s) without display and Sunny Boy Controls. A 4 conductor cable required between inverters. RS485 Cable is required between one inverter and Sunny Boy Control. One module is required for each inverter and one for the Control is required. Controls with 485 modules installed are available above.	030-03123	$175
RS232 Cable	Cable to connect Control to single inverter using RS232 modules - 50 feet (15 meter).	030-03147	$110
RS485 Cable	Cable to connect Control to multiple inverters using RS485 modules - 50 feet (15 meter).	030-03148	$110

Sunny Central 125 kW Industrial Inveters - Call for Pricing

TOP

FRONIUS IG Inverters

The FRONIUS IG inverters offer high efficiency, precision MPP-tracking, and intelligent thermal management, all of which result in superior energy output from grid-tied photovoltaic systems. Their wide input voltage range (150-450 volts) permit the use of modules in any power and voltage range. Their light weight and innovative mounting hardware make them very easy to install.Built-in DC and AC disconnects eliminate the need for external breakers in some cases, reducing total system costs.

FRONIUS IG inverters come standard with an integrated LCD that displays and records over 20 parameters pertaining to inverter and system operation. Fronius inverters have 3 expansion slots that allow you to add features, such as external sensors and remote displays. You can use a personal computer to update the inverter with the latest software upgrades.The larger inverters (over 3kw) are built with the same power stages as the smaller ones, but use 2 of them.

When these inverters see less than 1/2 array capacity, one stage turns off, giving the inverter higher efficiency during periods of low insolation. UL listed.

10-year warranty. Extended warranty available.

IG Plus Inverters

They offer all the features of the IG and add a lockable code-compliant DC disconnect with fused string combiner in a separable connection compartment that stays on the wall if the inverter needs to be serviced. The single phase inverters are field settable for 208, 240 or 277 volts. Two true three-phase output units are also available. They can be configured for positive or negative
ground. UL Listed.

10 year warranty. 15-year warranty available.

FRONIUS IG Wireless Personal Display

Model	Maximum AC Power	DC Array Voltage	LCD Display	Inverter Efficiency	Maximum DC Current	AC Output Volts	Weight (lbs.)
IG 5100	5100 W	150-450	Yes	94.4%	33.9A	240VAC	42
IG 4500-LV	4500 W	150-450	Yes	94.4%	29.3A	208VAC	42
IG 4000	4000 W	150-450	Yes	94.4%	26.1A	240VAC	42
IG 3000	2700 W	150-450	Yes	94.4%	18A	240VAC	26
IG 2500-LV	2350 W	150-450	Yes	94.4%	16.9A	208VAC	26
IG 2000	2000 W	150-450	Yes	94.4%	13.6A	240VAC	26
IG PLUS INVERTERS
IG Plus 3.0	3000 W					208VAC 240V 277V	55
IG Plus 3.8	3800 W						55
IG Plus 5.0	5000 W						84
IG Plus 6.0	6000 W						84
IG Plus 7.5	7500 W						84
IG Plus 10.0	10,000 W						108
IG Plus 11.4	11,400 W						108
IG Plus 11.4-3	11,400 W					208/240V	108
IG Plus 12.0-3	12,000 W					277	108

TOP

FRONIUS ACCESSORIES

The FRONIUS IG Personal Display is easy to install and easy to use. The readout and interface are based on the same display that comes standard on all FRONIUS IG Series inverters. Although tested to 150 feet indoors and 500 feet outdoors, there are many reports from the field of the units transmitting from much farther distances.

The Personal Display can aggregate data for up to 15 FRONIUS IG inverters or show data for each individual inverter in a system – i.e., data from a system that is over 75 kW AC can be viewed together or as sub-systems. It shows instantaneous data such as power, voltage and current, and it will store the daily and cumulative. The display offers two levels of access: easy and pro. In the easy level, homeowners can view system basics like power, energy output, CO2 offset, and the number of dollars saved; meanwhile, the pro level offers more advanced users information like voltage, current and grid frequency.

The unit was designed with a backlit display and a stylish silver case to attract the attention of solar enthusiasts and their visitors alike. The display can mount on a wall near a thermostat or clock, or be placed on the coffee table or nightstand.A wireless card is required for each inverter to be monitored.

Description	PART NUMBER	LIST PRICE	OUR PRICE	Purchase
Fronius IG Personal Display	030-03417	$284	$280
Wireless Card for Personal Display	030-03419	$134	$130

TOP

FRONIUS IG Public Display

The FRONIUS Public Display is constructed on the plug & play principle. Just insert the plug-in card or box and any cables supplied, select the display values and away you go. The complete package includes interface and alphanumeric large-format display. The data of up to 100 inverters, can be selected for the rotating display. One value in the group is picked as the favourite and is then displayed every second time the value changes.

The following values can be displayed: AC-Power – Total Energy – Energy/Day - Energy/Year - CO2 Total - CO2/Year - CO2/Day - Total Earnings – Earnings/Day – Earnings/Year - Date & Time. A Com Card (030-03425 on next page) must be installed in each inverter to be monitored.

Description	PART NUMBER	LIST PRICE	OUR PRICE	Purchase
Public Display	030-03463	$2,329	$2,295

TOP

FRONIUS IG DatCom Accessories

Remote data communications and data logging features can easily be added to transform the inverter into a sophisticated data acquisition system and weather monitoring station.

DatCom components and accessories connect to the inverter and each other with standard Cat 5 network cables and RS-232 cables.

TOP

Datalogger Boxes and Cards

Datalogging requires a COM card to be installed in each inverter in the system and a Datalogger Box.

The Datalogger Box stores the data collected from the inverters and any of the optional weather sensors, and connects to a PC or an external modem to allow you to monitor your PV system from anywhere in the world. Two versions of the Datalogger Box are available. The Datalogger Easy monitors one IG inverter.

The Datalogger Pro can monitor up to 100 Fronius IG inverters. Datalogger cards perform the same function as the Boxes. The Easy card works for one inverter; the Pro card works for up to 100 inverters. Both cards work with a COM card and DatCom systems.

TOP

Sensor Box, Sensor Card and Sensors

A Sensor Box or Sensor Card is required to add weather sensors to your data acquisition system.

The Sensor Box and Card each have 6 inputs – two for measuring temperature, one for measuring irradiance, two digital inputs for a wind speed sensor and/or kilowatt hour meter and one 20 mA current interface for a humidity sensor.

Model	Accessory Description	SKU	OUR PRICE	Purchase
COM Card, Retrofit	Communications card for all Fronius IG Inverters	030-03425	$135
Datalogger Pro Card		030-03432	$650
Datalogger Pro Box	Control and Monitoring data storage and PC interface for up to 100 IG inverters	030-03431	$695
Datalogger Easy Card		030-03434	$420
Datalogger Easy Box	Control and Monitoring data storage and PC interface for 1 IG inverter	030-03435	$440
Datalogger Interface Box		030-03436	$785
Interface Box		030-03440	$340
Interface Card Easy		030-03442	$175
TIXI modem		030-03452	$550
Sensor Card		030-03443	$650
Sensor Box	Monitoring interface with 6 sensor input channels	030-03442	$695
Sensor, Wind Speed	For measuring wind speed. Sensor box (above) is required.	030-03446	$85
Sensor, Ambient Temperature	For measuring ourside temperature. Sensor box (above) is required.	030-03448	$50
Sensor, Module Temperature	For measuring Module temperature. Sticks to back of PV module. Sensor box (above) is required.	030-03449	$105
Sensor, Irradiance	Reference PV cells for measuring solar insolation. Sensor box (above) is required.	030-03444	$240
RS232 Null Modem Cable	For connection of Datalogger Box to PC or Modem.	030-03453	$25
Cat-5 Cable 3 foot	Network Cable for connecting inverters to each other or between Sensor Box and Datalogger Box	030-03455	$5
Cat-5 Cable 65 foot	Network Cable for connecting inverter to Datalogger.	030-03457	$35
Cat-5 Cable 196 foot	Network Cable for connecting inverter to Datalogger.	030-03459	$130

TOP

eNPHASE

Grid-Connected Micro-Inverter System
The Enphase Micro-Inverter system is the first commercially available micro-inverter system for residential and commercial solar PV applications. The Enphase Micro-Inverter is a fully-integrated device that converts the DC output from a single solar module into grid-compliant AC power. The micro-inverter system is designed to maximize energy harvest, increase system reliability and dramatically simplify design, installation and system management.

Easy Design and Installation
System design is a breeze. No more string sizing exercises. No more headaches trying to layout equal lengths of strings to fit on a roof. Each micro-inverter is mounted to the module racking structure and connected directly to the DC wires from each PV module. The micro-inverter AC wire harnesses are connected together to form a continuous AC branch circuit that is connected to the AC utility distribution center.

Optimal Energy Harvest

Each PV module is now individually power tracked by a micro-inverter, eliminating power loss caused by a few underperforming modules in the array. Now you can realize the full energy potential of every PV array, reducing the power-limiting effects of shading, dust, debris, module mismatch, and thermal differences. Problems are now isolated to a small fraction of the PV array, while the rest of the PV system continues to function normally. Service becomes routine maintenance rather than a costly emergency.

Reliability
The Enphase Micro-Inverter is qualified to a NEMA6 environment rating and operates at full power up to 65°C (149°F), allowing it to be operated in harsh environments.

Module Level Monitoring
The Enphase Micro-Inverter system includes advanced communication, performance visualization and data analysis on a per-module basis. Every micro-inverter communicates with the Enphase Enlighten website to show you a physically accurate representation of your individual system and how each PV module is performing in real time.

Data is monitored 24/7 and Enlighten will immediately notify you via email of any issues it detects. For example, Enlighten will notify you if an individual module is underperforming compared to its neighboring modules.

Ordering
There are models below for 240- and 208-volt output and they are available with MC Solarline 1 or Solarline 2 cable connections on them. They are designed for input from a 150- to 200-watt module with 72 5-inch cells.

Order the voltage to match your system and a connector to match your module output cables. Order one install kit for each AC branch circuit of up to 16 inverters in a 240-volt system and one for each 26 inverters in a 208-volt system.

One IEMU-01 is required for Internet monitoring on each installation. The IEMU-01 comes with one year of monitoring on residential systems. Call for information about commercial monitoring.

Made in the USA

ENPHASE MICRO-INVERTER SYSTEMS
Enphase model	Module watts	AC output volts	Module MC connector	CEC efficiency
M175-24-240-SO-01	150 - 200	240	Solarline 1	94.5%
M175-24-208-SO-01	150 - 200	208	Solarline 1	94.5%
M175-24-240-SO-02	150 - 200	240	Solarline 2	94.5%
M175-24-240-SO-02	150 - 200	208	Solarline 2	94.5%

TOP

solectria
PVI Series Residential Inverters

PVI 1800W and PVI 2500W
The PVI 1800W and PVI 2500W only weigh 34 and 36 pounds, respectively, and have low-profile sealed NEMA 4 enclosures with an interactive menu driven LCD display. They are available in 208VAC and 240VAC versions.

The inverters are pre-wired so they do not have to be disassembled for installation. They can be purchased alone or panelized with AC and DC disconnects and utility meter. Call for pricing on panelized inverters.

The PVI 1800W and 2500W are available with 5, 10 or 15-year warranty options.

PVI 3000W, 4000W, 5000W, 5300W
These larger inverters in the Solectria line have some of the highest CEC efficiencies, 96% on all models. They have an integrated DC disconnect with a fused DC string combiner in a detachable wiring box.

A quick-mount wall bracket makes it a snap to mount this lightweight inverter line. Their universal auto detect feature allows them to be used on 240 and 208 VAC systems. RS-232 and RS-485 ports allow connection for monitoring. ETL Listed to UL 1741.

A 10-year warranty is standard with the 3000W and larger models.

SOLECTRIA PVI SERIES RESIDENTIAL INVERTERS
Solectria model	Continuous AC power	DC array voltage	Peak power tracking	Max DC current	CEC efficiency	Weight (lbs)
PVI 1800W	1800W	125-400	125-350 VDC	11A	92.5%	34
PVI 2500W	2500W	125-400	125-350 VDC	15A	93%	36
PVI 3000W	2900W	200-600	200-550VDC	16A	96%	47
PVI 4000W	3900W	200-600	200-550VDC	20A	96%	48
PVI 5000W	4900W	200-600	200-550VDC	25A	96%	58
PVI 5300W	5300W	200-600	200-550VDC	25A	96%	60

TOP

PV POWERED INVERTERS
Residential Grid-Tie Inverters

PV Powered inverters deliver maximum energy harvest from your PV system with high reliability and world-class efficiency. Significant software integration and a modular design combine to create a scalable platform with fewer components and higher uptime. By employing fewer parts and ensuring those parts are of the highest quality, PV Powered has created a line of residential grid-tie inverters that spend more time generating electricity and less time being repaired.

Some models are available in extended and standard voltage range versions to fit the needs of each installation.

The Extended Voltage Range (115-500VDC) products offer the industry’s lowest MPPT voltage and are the ideal choice for integration with next generation low-voltage and building-integrated (BIPV) modules.

The Standard Voltage Range (150-500VDC) products are optimized for traditional modules. Together, the entire product line offers the most design configurations across the widest range of PV modules.

Additional flexibility is provided by PV Powered’s new ETL-listed and NEC code-compliant integration platform for both indoor and outdoor installations. Other system options include different mounting methods, AC and DC disconnects, inverter status display and wired or wireless data monitoring.

This flexible approach enables visually pleasing, site-specific configurations that reduce permitting and inspection issues and reduce installation time.

Performance monitoring is available which includes low-cost, secure, web-based access to your system’s status and performance history. With the PVM1010 option, you can maximize your system uptime and protect your solar investment.

The PVM1010 along with the secure Internet-based server operated by PV Powered is equivalent to a standalone data logging meter and communication interface without the cost and inconvenience of installation and maintenance of a separate metering system. After getting registered you get access to inverter information from anywhere you can connect to the Internet.

Reports of power output and energy production trends, local weather conditions and forecasts, verification that your system is working at its full potential and collection and export of data for service and maintenance planning are all included at no charge. Just install the PVM1010 in each inverter to be monitored and connect to a router with Cat 5 cable.